Embsys Technologies Private Limited

Analog to rs485 converter using the standard Modbus-RTU protocol, address, baud rate can be set by the host computer software that can be articulated in the 485 bus. Products according to industry-standard design, manufacture, with over-voltage protection, over-current protection, anti-interference ability, high reliability.

Analog to RS485 Parameters

Power supply: DC 10~30V
Acquire the Signal: 0-5v ,0- 10v
Protocol: MODBUS-RTU
Input resistance: 0-5v/0-10v≥10K ohms
Power consumption: 0.4w
Signal output: RS485
AD conversion resolution: 10-bit or 12-bit optional
Storage environment: -20???~+60???

 

 

Analog to RS485 Converter Use:

·        Intelligent building control, security, and engineering applications

·        Industrial sites, power distribution cabinets, and other places that require an RS485 output

·        Debugging and control of equipment operation

·        Medical machine monitoring

·        Sensor signal to restore the long-range transmission and signal

 

·        Industrial field data for a given actuator

 

 

 

 

Wiring instructions

 

The conversion module only needs one end of the power supply to be able to work normally, and the other end of the power supply is prepared for the subsequent stage power supply. If the latter stage is not powered, it can be left floating.

When multiple 485 models are connected to the same bus, there are certain requirements for on-site wiring, please contact us for details.

 

 

 

Analog to rs485 converter using the standard Modbus-RTU protocol, address, baud rate can be set by the host computer software that can be articulated in the 485 bus. Products according to industry-standard design, manufacture, with over-voltage protection, over-current protection, anti-interference ability, high reliability.

Analog to RS485 Parameters:

Power supply: DC 10~30V
Number of input channels: 1-way or 2-way optional
Acquire the Signal: 4-20ma,0-20ma
Protocol: MODBUS-RTU
Input resistance: 4-20ma ≤200 ohms
Power consumption: 0.4w
Signal output: RS485
AD conversion resolution: 10-bit or 12-bit optional
Storage environment: -20 60

 

 

Analog to RS485 Converter Use

·        Intelligent building control, security, and engineering applications

·        Industrial sites, power distribution cabinets, and other places that require an RS485 output

·        Debugging and control of equipment operation

·        Medical machine monitoring

·        Sensor signal to restore the long-range transmission and signal

 

·        Industrial field data for a given actuator

 

 

 

 

Wiring instructions

 

 

Analog to rs485 converter using the standard Modbus-RTU protocol, address, baud rate can be set by the host computer software that can be articulated in the 485 bus. Products according to industry-standard design, manufacture, with over-voltage protection, over-current protection, anti-interference ability, high reliability.

Analog to RS485 Parameters:

Power supply: DC 10~30V
Number of input channels:2 channel
Acquire the Signal: 0-5v ,0- 10v
Protocol: MODBUS-RTU
Input resistance: 0-5v/0-10v≥10K ohms
Power consumption: 0.4w
Signal output: RS485
AD conversion resolution: 10-bit or 12-bit optional
Storage environment: -20 60

 

 

Analog to RS485 Converter Use

·        Intelligent building control, security, and engineering applications

·        Industrial sites, power distribution cabinets, and other places that require an RS485 output

·        Debugging and control of equipment operation

·        Medical machine monitoring

·        Sensor signal to restore the long-range transmission and signal

 

·        Industrial field data for a given actuator

 

 

 

 

Wiring instructions

 

The conversion module only needs one end of the power supply to be able to work normally, and the other end of the power supply is prepared for the subsequent stage power supply. If the latter stage is not powered, it can be left floating.

When multiple 485 models are connected to the same bus, there are certain requirements for on-site wiring, please contact us for details.

 

 

 

This product is an industrial-grade 2 channel analog output product that supports 0~20mA, 0-5V, 0-10V range. The input side is the standard MODBUS-RTU protocol, which conforms to industrial standards and is suitable for various industrial occasions and automation systems.

      Features:

        Support 2 channels, it means analog output, either current or voltage outputs, each output type is optionall  12-bit resolution, 0.1% precision ADCl  Support standard Modbus-RTU communication protocoll  Communication running indicator, anti-crash watchdogl  With lightning protection, electrostatic protection RS485 communication interface, op amp signal isolationl  The address and baud rate can be set by the host computer software

  Anti-reverse connection, overvoltage protection, overcurrent protection, short circuit protection

This product is an industrial-grade 2 channel analog output product that supports 0~20mA, 0-5V, 0-10V range. The input side is the standard MODBUS-RTU protocol, which conforms to industrial standards and is suitable for various industrial occasions and automation systems.

      Features:

       Support 2 channels, it means analog output, either current or voltage outputs, each output type is optionall  12-bit resolution, 0.1% precision ADCl  Support standard Modbus-RTU communication protocoll  Communication running indicator, anti-crash watchdogl  With lightning protection, electrostatic protection RS485 communication interface, op amp signal isolationl  The address and baud rate can be set by the host computer software

 Anti-reverse connection, overvoltage protection, overcurrent protection, short circuit protection

Programmable Analog 0-10V 0-20mA 4-20mA 2-10V Display Meter Panel-mounted High Precision

XDB-BSX-011\012\013 ( Option [Standard type]has no relay inside and no RS485 MODBUS functions, pls do note that. )

Main Features

• Standard Type: Default 0-10V 0-20mA 2-10V 4-20mA display meter. RS485 port type and Relay output type are available.

• Default standard type and RS485 port type: no relay inside, operating power supply DC 6-25V, power consumption 24V/40mA;

• 1-channel current or voltage signal input, selectable.

• Voltage signal input impedance: >30kΩ, current input impedance: <250Ω

• 0.56inch 4-byte LED tube display.

• Parameters are programmable through 3 buttons, convenient to use.

• Front view dimension: 79x43x25mm. installation cut-out size: 76.5x39.5mm

PARAMETERS:   PRODUCT DESCRIPTION: 

Programmable Analog 0-10V 0-20mA 4-20mA 2-10V Display Meter Panel-mounted High Precision

Main Features

• Standard Type: Default 0-10V 0-20mA 2-10V 4-20mA display meter.

• Default standard type and RS485 port type: no relay inside, operating power supply DC 6-25V, power consumption 24V/40mA;

• 1-channel current or voltage signal input, selectable.

• Voltage signal input impedance: >30kΩ, current input impedance: <250Ω

• 0.56inch 4-byte LED tube display.

• Parameters are programmable through 3 buttons, convenient to use.

• RS485 port type supports standard MODBUS-RTU protocol, and supports communication among display meters.

• Front view dimension: 79x43x25mm. installation cut-out size: 76.5x39.5mm

• RS485 port type: display meter address, baud rate, communication interval time, etc parameters are pogrammable..

Analog to rs485 converter using the standard Modbus-RTU protocol, address, baud rate can be set by the host computer software that can be articulated in the 485 bus. Products according to industry-standard design, manufacture, with over-voltage protection, over-current protection, anti-interference ability, high reliability.

Analog to RS485 Parameters:

Power supply: DC 10~30V
Number of input channels: 2 channel
Acquire the Signal: 4-20ma
Protocol: MODBUS-RTU
Input resistance: 4-20ma ≤200 ohms
Power consumption: 0.4w
Signal output: RS485
AD conversion resolution: 10-bit or 12-bit optional
Storage environment: -20???~+60???

 

 

Analog to RS485 Converter Use

·        Intelligent building control, security, and engineering applications

·        Industrial sites, power distribution cabinets, and other places that require an RS485 output

·        Debugging and control of equipment operation

·        Medical machine monitoring

·        Sensor signal to restore the long-range transmission and signal

 

·        Industrial field data for a given actuator

 

 

 

 

Wiring instructions

 

Analog to rs485 converter using the standard Modbus-RTU protocol, address, baud rate can be set by the host computer software that can be articulated in the 485 bus. Products according to industry-standard design, manufacture, with over-voltage protection, over-current protection, anti-interference ability, high reliability.

Analog to RS485 Parameters:

Power supply: DC 10~30V
Number of input channels: 4 channel
Acquire the Signal: 4-20ma,0-20ma
Protocol: MODBUS-RTU
Input resistance: 4-20ma ,0-20ma ≤200 ohms
Power consumption: 0.4w
Signal output: RS485
AD conversion resolution: 10-bit or 12-bit optional
Storage environment: -20???~+60???

 

 

Analog to RS485 Converter Use

·        Intelligent building control, security, and engineering applications

·        Industrial sites, power distribution cabinets, and other places that require an RS485 output

·        Debugging and control of equipment operation

·        Medical machine monitoring

·        Sensor signal to restore the long-range transmission and signal

 

·        Industrial field data for a given actuator

 

 

 

 

Wiring instructions

 

Analog to rs485 converter using the standard Modbus-RTU protocol, address, baud rate can be set by the host computer software that can be articulated in the 485 bus. Products according to industry-standard design, manufacture, with over-voltage protection, over-current protection, anti-interference ability, high reliability.

Analog to RS485 Parameters:

Power supply: DC 10~30V
Number of input channels:  2-way 
Acquire the Signal: 0-5v ,0- 10v,4-20ma,0-20ma
Protocol: MODBUS-RTU
Input resistance: 4-20ma ≤200 ohms,0-5v/0-10v≥10K ohms
Power consumption: 0.4w
Signal output: RS485
AD conversion resolution: 10-bit or 12-bit optional
Storage environment: -20???~+60???

 

 

Analog to RS485 Converter Use

·        Intelligent building control, security, and engineering applications

·        Industrial sites, power distribution cabinets, and other places that require an RS485 output

·        Debugging and control of equipment operation

·        Medical machine monitoring

·        Sensor signal to restore the long-range transmission and signal

 

·        Industrial field data for a given actuator

 

 

 

 

Wiring instructions

 

The conversion module only needs one end of the power supply to be able to work normally, and the other end of the power supply is prepared for the subsequent stage power supply. If the latter stage is not powered, it can be left floating.

When multiple 485 models are connected to the same bus, there are certain requirements for on-site wiring, please contact us for details.

 

 

 

Analog to rs485 converter using the standard Modbus-RTU protocol, address, baud rate can be set by the host computer software that can be articulated in the 485 bus. Products according to industry-standard design, manufacture, with over-voltage protection, over-current protection, anti-interference ability, high reliability.

Analog to RS485 Parameters:

Power supply: DC 10~30V
Number of input channels: 1-way or 2-way optional
Acquire the signal:4-20ma/0-20ma,0-5v/10v
Protocol: MODBUS-RTU
Input resistance: 4-20ma ≤200 ohms,0-5v/0-10v≥10K ohms
Power consumption: 0.4w
Signal output: RS485
AD conversion resolution: 10-bit or 12-bit optional
Storage environment: -20???~+60???

 

 

Analog to RS485 Converter Use

·        Intelligent building control, security, and engineering applications

·        Industrial sites, power distribution cabinets, and other places that require an RS485 output

·        Debugging and control of equipment operation

·        Medical machine monitoring

·        Sensor signal to restore the long-range transmission and signal

 

·        Industrial field data for a given actuator

 

 

 

 

Wiring instructions

 

The conversion module only needs one end of the power supply to be able to work normally, and the other end of the power supply is prepared for the subsequent stage power supply. If the latter stage is not powered, it can be left floating.

When multiple 485 models are connected to the same bus, there are certain requirements for on-site wiring, please contact us for details.

 

 

 

Analog to rs485 converter using the standard Modbus-RTU protocol, address, baud rate can be set by the host computer software that can be articulated in the 485 bus. Products according to industry-standard design, manufacture, with over-voltage protection, over-current protection, anti-interference ability, high reliability.

Analog to RS485 Parameters:

Power supply: DC 10~30V
Number of input channels:4 channel
Acquire the Signal: 0-5v ,0- 10v
Protocol: MODBUS-RTU
Input resistance: 0-5v/0-10v≥10K ohms
Power consumption: 0.4w
Signal output: RS485
AD conversion resolution: 10-bit or 12-bit optional
Storage environment: -20 60

 

 

Analog to RS485 Converter Use

·        Intelligent building control, security, and engineering applications

·        Industrial sites, power distribution cabinets, and other places that require an RS485 output

·        Debugging and control of equipment operation

·        Medical machine monitoring

·        Sensor signal to restore the long-range transmission and signal

 

·        Industrial field data for a given actuator

 

 

 

 

Wiring instructions

 

The conversion module only needs one end of the power supply to be able to work normally, and the other end of the power supply is prepared for the subsequent stage power supply. If the latter stage is not powered, it can be left floating.

When multiple 485 models are connected to the same bus, there are certain requirements for on-site wiring, please contact us for details.

 

 

 

Analog to rs485 converter using the standard Modbus-RTU protocol, address, baud rate can be set by the host computer software that can be articulated in the 485 bus. Products according to industry-standard design, manufacture, with over-voltage protection, over-current protection, anti-interference ability, high reliability.

Analog to RS485 Parameters:

Power supply: DC 10~30V
Number of input channels: 4
Acquire the Signal: 0-5v ,0- 10v
Protocol: MODBUS-RTU
Input resistance: 4-20ma ≤200 ohms,0-5v/0-10v≥10K ohms
Power consumption: 0.4w
Signal output: RS485
AD conversion resolution: 10-bit or 12-bit optional
Storage environment: -20???~+60???

 

 

Analog to RS485 Converter Use

·        Intelligent building control, security, and engineering applications

·        Industrial sites, power distribution cabinets, and other places that require an RS485 output

·        Debugging and control of equipment operation

·        Medical machine monitoring

·        Sensor signal to restore the long-range transmission and signal

 

·        Industrial field data for a given actuator

 

 

 

 

Wiring instructions

 

The conversion module only needs one end of the power supply to be able to work normally, and the other end of the power supply is prepared for the subsequent stage power supply. If the latter stage is not powered, it can be left floating.

When multiple 485 models are connected to the same bus, there are certain requirements for on-site wiring, please contact us for details.

 

 

 

This product is an industrial-grade standard analog output product that supports 0~20mA, 0-5V, 0-10V range 2-channel output. The application layer adopts the standard MODBUS-RTU protocol, which conforms to industrial standards and is suitable for various industrial occasions and automation systems. It is convenient to communicate with the host computer, which can realize rapid networking and build a monitoring system. Suitable for various industrial occasions and automation systems. Features ⚫ Support 2 current type and voltage type analog outputs, each output type is optional ⚫ 12-bit resolution, 0.1% precision ADC ⚫ Support standard Modbus-RTU communication protocol ⚫ Communication running indicator, anti-crash watchdog ⚫ With lightning protection, electrostatic protection RS485 communication interface, op amp signal isolation ⚫ The address and baud rate can be set by the host computer software ⚫ Anti-reverse connection, overvoltage protection, overcurrent protection, short circuit protection.

This product is an industrial-grade standard analog output product that supports 0~20mA, 0-5V, 0-10V range 2-channel output. The application layer adopts the standard MODBUS-RTU protocol, which conforms to industrial standards and is suitable for various industrial occasions and automation systems. It is convenient to communicate with the host computer, which can realize rapid networking and build a monitoring system. Suitable for various industrial occasions and automation systems. Features ⚫ Support 2 current type and voltage type analog outputs, each output type is optional ⚫ 12-bit resolution, 0.1% precision ADC ⚫ Support standard Modbus-RTU communication protocol ⚫ Communication running indicator, anti-crash watchdog ⚫ With lightning protection, electrostatic protection RS485 communication interface, op amp signal isolation ⚫ The address and baud rate can be set by the host computer software ⚫ Anti-reverse connection, overvoltage protection, overcurrent protection, short circuit protection.

An RTD (Resistance Temperature Detector) to 4-20mA converter is a device that converts the resistance changes of an RTD sensor into a 4-20mA current signal. This is particularly useful for transmitting temperature data over long distances with minimal signal loss and interference.

Analog to rs485 converter using the standard Modbus-RTU protocol, address, baud rate can be set by the host computer software that can be articulated in the 485 bus. Products according to industry-standard design, manufacture, with over-voltage protection, over-current protection, anti-interference ability, high reliability.

Analog to RS485 Parameters

Power supply: DC 10~30V
Number of input channels: 1-way or 2-way optional
Acquire the Signal: 4-20ma,0-20ma
Protocol: MODBUS-RTU
Input resistance: 4-20ma ≤200 ohms
Power consumption: 0.4w
Signal output: RS485
AD conversion resolution: 10-bit or 12-bit optional
Storage environment: -20 60

 

 

Analog to RS485 Converter Use

·        Intelligent building control, security, and engineering applications

·        Industrial sites, power distribution cabinets, and other places that require an RS485 output

·        Debugging and control of equipment operation

·        Medical machine monitoring

·        Sensor signal to restore the long-range transmission and signal

 

·        Industrial field data for a given actuator

 

 

Programmable Analog 0-10V 0-20mA 4-20mA 2-10V Display Meter Panel-mounted High Precision

XDB-BSX-011\012\013 ( Option [Standard type]has no relay inside and no RS485 MODBUS functions, pls do note that. )

Main Features

• Standard Type: Default 0-10V 0-20mA 2-10V 4-20mA display meter. RS485 port type and Relay output type are available.

• Default standard type and RS485 port type: no relay inside, operating power supply DC 6-25V, power consumption 24V/40mA;

• 1-channel current or voltage signal input, selectable.

• Voltage signal input impedance: >30kΩ, current input impedance: <250Ω

• 0.56inch 4-byte LED tube display.

• Parameters are programmable through 3 buttons, convenient to use.

• Front view dimension: 79x43x25mm. installation cut-out size: 76.5x39.5mm.

This product is an industrial-grade 2 channel analog output product that supports 0~20mA, 0-5V, 0-10V range. The input side is the standard MODBUS-RTU protocol, which conforms to industrial standards and is suitable for various industrial occasions and automation systems.

      Features:

         Support 2 channels, it means analog output, either current or voltage outputs, each output type is optionall  12-bit resolution, 0.1% precision ADCl  Support standard Modbus-RTU communication protocoll  Communication running indicator, anti-crash watchdogl  With lightning protection, electrostatic protection RS485 communication interface, op amp signal isolationl  The address and baud rate can be set by the host computer software

 

 Anti-reverse connection, overvoltage protection, overcurrent protection, short circuit protection

This product is an industrial-grade 2 channel analog output product that supports 0~20mA, 0-5V, 0-10V range. The input side is the standard MODBUS-RTU protocol, which conforms to industrial standards and is suitable for various industrial occasions and automation systems.

      Features:

l         Support 2 channels, it means analog output, either current or voltage outputs, each output type is optionall  12-bit resolution, 0.1% precision ADCl  Support standard Modbus-RTU communication protocoll  Communication running indicator, anti-crash watchdogl  With lightning protection, electrostatic protection RS485 communication interface, op amp signal isolationl  The address and baud rate can be set by the host computer software

 

l  Anti-reverse connection, overvoltage protection, overcurrent protection, short circuit protection